Poly(ethylene) CAS NO.9002-88-4

Specifications: HDPE Property Unit Standard Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min …

Specifications: HDPE Property Unit Standard Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min ≤ 1.0 Tensile yield strength MPa ≥ 19.0 Flexural modulus Mpa ≥ 965 Elongation@ break % ≥ 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 LDPE STANDARD Melt Flow Rate(g/10min) (1: 21.6kg) 9.0-13.0 Density(g/cm 3 ) 0.948-0.951 Power Ash% 0.04 Tensile Strength(MPa) 23 Elongation@Break% 600 Environmental stress-cracking 1500